ตัวกรองผลการค้นหา
So what next then?
แปลว่างั้น เอาไงต่อล่ะ?
lengthen
ตรงข้ามกับshorten
naphthenes
แปลว่า(เคมี) คือ Polymethylene hydrocarbons ซึ่งจะพบมากในน้ำมันปิโตรเลี่ยม
Brinell Hardness Test
แปลว่า(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.
Toxicity
แปลว่า(Environmental Engineering) A U.S. EPA hazardous waste characteristic defined with a rigorous test procedure, the TCLP (for Toxicity Characteristic Leaching Procedure). In the procedure, a waste is extracted for 24 hours with an acetic acid solution. The acid extract is then analyzed for the presence of any of the contaminants listed in the procedure.
Bend Test
แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.
osmiridium
แปลว่า(โลหะ) โลหะผสมของออสเมี่ยม (17-487.) และ ridium 497. iวมทั้ง platinum suthenium และ rhodium อย่างละเล็ก ๆ น้อย ๆ เป็นส่วนผสมอยู่ด้วย
lengthening bar
แปลว่า(วาดเขียน) แท่งโลหะต่อขาวงเวียนเพื่อใช้ขยายรัศมีของวงกลม
Parthenon
แปลว่าวิหารที่มีชื่อเสียงมากในสมัยกรีก
Pathenon
แปลว่าวัดที่สร้างด้วยหินอ่อน ลือชื่อของเมืองอะเธนส์แห่งกรีก ซึ่งถือเป็นแบบศิลปะงดงามของการก่อสร้าง
In situ treatment
แปลว่า(Environmental Engineering) Treatment of a waste in place, as opposed to pumping or digging the waste up and then treating it.
lengthening rod
แปลว่าก้านต่อเครื่องเจาะ ซึ่งปลายด้านหนึ่งเป็นเกลียวตัวผู้ ปลายอีกด้านหนึ่งเป้นเกลียวตัวเมีย สำหรับต่อด้ามเครื่องมือ เจาะให้ยาวออกไปอีก