ค้นเจอ 7,097 รายการ

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Bending moment:

แปลว่า(english) A system of internal forces whose resultant is a moment. This term is most commonly used to refer to internal forces in beams.

Bell Mouth

แปลว่า(english) The flaring or tapering of a machined hole, usually made at the entrance end because of misalignment or spring of the cutting tool.

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

bead and-quirk

แปลว่า(เครื่องไม้) แนวร่องแคบ ๆ ที่แยกหรือคั่นลวดลายประดับบนไม้เรียกว่า quirk bead

Bevel

แปลว่า(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.

Absorbed Moisture

แปลว่า(Concrete Engineering) Moisture which is mechanically held in a material. In aggregates, that water which is not available to become part of the mixing water is designated "absorbed" water.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Beryllium Copper

แปลว่า(english) An alloy of copper and 2-3% beryllium with optionally fractional percentages of nickel or cobalt. Alloys of this series show remarkable age-hardening properties and an ultimate hardness of about 400 Brinell (Rockwell C43). Because of such hardness and good electrical conductivity, beryllium-copper is used in electrical switches, springs, etc.

beheld

แปลว่ามอง (กริยาช่องที่ 2 ของ behold), เห็น

VI

youngberry

แปลว่าผลไม้รสหวานสีม่วงเข้มของต้น blackberry

N

Bending Strength

แปลว่า(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.