ผลการค้นหา

By-Pass

แปลว่า(english) Manual control used to by-pass automatic valve if it fails or in an emergency.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Incorporate by Reference

แปลว่ารวมเข้าโดยการอ้างอิง

by-pass valve spring

แปลว่าสปริงอัดลิ้นปล่อยน้ำมันเชื้อเพลิงของคาบูเรเตอร์

Blow Back

แปลว่า(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

Decomposers

แปลว่า(Environmental Engineering) Organisms which utilize energy from wastes or dead organisms. Decomposers complete the cycle by returning nutrients to the soil or water and carbon dioxide to the air or water.

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Blue Print

แปลว่า(english) A pen or ink line drawing reproduced (printed) on sensitized paper by direct exposure.

Adeline Steelmaking Process

แปลว่า(english) Method of producing a precision casting of steel or steel alloys using aluminolthermic process and lost wax, followed by centrifugal action.

Anthropogenic

แปลว่า(Environmental Engineering) Of, made, or caused by human activity or actions.

Capillarity

แปลว่า(Concrete Engineering) A wick-like action whereby a liquid will migrate vertically through material, in a upward direction; as oil in a lamp travels upward through the wick,

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.