ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) The tool used to spot (or position) the rail cars for unloading. It is located on the north end of the unloading area.
(english) Sinking a pattern down into the sand to the desired position and ramming the sand around it.
(english) An accident caused by the failure of the walls of the hearth of the furnace resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.
(english) A property of a cross sectional shape, which depends on shape, and orientation. Section modulus is usually denoted S, and S = I/c, where I = moment of inertia about an axis through the centroid, and c is the distance from the centroid to the extreme edge of the section.
(Concrete Engineering) In the manufacture of concrete products, the period between completion of casting and the introduction of additional heat or the steam curing period
(english) Reverse taper which would prevent removal of a pattern from a mold or a core from a corebox.
(Environmental Engineering) The cycle of elements through the biotic and abiotic environment.
(Environmental Engineering) The volatile suspended solids concentration in the activated sludge tank.
(Concrete Engineering) In prestress concrete, the device used to stress the tendons.
(Environmental Engineering) The total suspended solids concentration in the activated sludge tank.
(Environmental Engineering) (TDS) is the amount of dissolved matter in the water.
(Environmental Engineering) The production of energy by the degradation of organic compounds.