ค้นเจอ 730 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "turn on the water"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Bolster (die block)

(english) A “tool” or reinforcing part which supports the backer-which, in turn, supports an extruding die against the pressure of extrusion.

right hand turn

เลี้ยวขวา

Big Winch

(english) The tool used to spot (or position) the rail cars for unloading. It is located on the north end of the unloading area.

NPDES

(Environmental Engineering) The National Pollutant Discharge Elimination System. The discharge criteria and permitting system established by the U.S. EPA as a result of the Clean Water Act and its subsequent amendments or the permit required by each discharger as a result of the Clean Water Act.

Project size

(Software Engineering) an indication of the overall effort to be expended or the number of people working on the project

Brinell Hardness

(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

BACK PRESSURE

(english) The level of pressure on the return or downstream side of a device or system.

Maximum contaminant level (MCL)

(Environmental Engineering) The maximum allowable concentration of a given constituent in potable water.

Total suspended solids

(Environmental Engineering) (TSS) is the amount of suspended (filterable) matter in a water.

Bare Spot

(english) A location on the strip where coating did not adhere.

Ac1

(english) The temperature at which austenite begins to form on heating.

Back Rake

(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z