ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 569 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "the serpent king"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

NPDES

(Environmental Engineering) The National Pollutant Discharge Elimination System. The discharge criteria and permitting system established by the U.S. EPA as a result of the Clean Water Act and its subsequent amendments or the permit required by each discharger as a result of the Clean Water Act.

Dry Rodded Weight

(Concrete Engineering) The weight of dry aggregate rodded into a cylindrical container of diameter approximately equal to the height, each of 3 layers rodded 25 times, and the excess aggregate struck off level with the top of the container

Inelastic:

(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Design

(Software Engineering) an activity that translates the requirements model into a more detailed model that is the guide to implementation of the software

Bifluoride Feeder

(english) A machine in the Tin Mill that automatically puts bifluoride into the plater bath.

Bar, Flask

(english) A rib in the cope of a tight flask to help support the sand.

Back-up Balance

(english) Cylinders that supply the force used to hold the back-up rolls up in place.

Levels of abstraction

(Software Engineering) the degree of detail with which some representation of the software is presented

Project tracking

(Software Engineering) the activity that enables a manager to understand the status of a project

Burn-On-Sand

(english) Sand adhering to the surface of the casting that is extremely difficult to remove.

Landfill

(Environmental Engineering) A legal and controlled area for the placement of wastes into the ground.

Brinell Hardness Test

(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด