ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 1,031 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "run-of-the-mill"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Blow

(english) The impact or force delivered by one workstroke of the forging equipment.

Saponification

(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.

Acetyl Tributyl Citrate

(english) One of the lubricating oils generally applied on tin Mill Products (tin plate, TFS-chrome/chrome oxide coated steel, and blackplate).

Bright Annealing 2

(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.

Block Off

(english) 1) Wooden separators which are used at both the bottom of a lift and between IPM's (bundles) of a lift. 2) The act of placing 4x4s between the lifts in the piler's box.

Breaker

(english) Uncoiler rolls through which the strip passes; composed of a mandrel and leveling rolls which unwind the strip prior to processing through the Pickler. Breaker rolls assist in breaking up the Hot Mill surface scale.

Consistency

(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

Mass balance

(Environmental Engineering) An organized accounting of all inputs and outputs to an arbitrary but defined system. Stated in other terms, the rate of mass accumulation within a system is equal to the rate of mass input less the rate of mass output plus the rate of mass generation within the system.

ABSOLUTE PRESSURE

(english) The indicated value of the weight of the earth's atmosphere. At sea level, this value is approximately 14.65 psi (pounds per square inch).

Kinetic Energy:

(english) The energy of a moving mass; equal to (mv^2)2. Where m is mass and v is the magnitude of the velocity.

Design walkthrough

(Software Engineering) a formal technical review of the design

Preliminary design

(Software Engineering) creates representation of the data and architecture

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด