ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Environmental Engineering) A bond in which electrons are shared approximately equally by two atoms.
(Environmental Engineering) A reaction in which the rate expression corresponds to the stoichiometric equation.
(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.
(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner
(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.
(english) Agitation of a bath of metal caused by the liberation of a gas beneath its surface. May be deliberately induced by the addition of oxidizing material to a bath containing excess carbon. In the later case it is called a carbon boil and CO or CO2 are liberated.
(Concrete Engineering) A form of segregation in which some of the water in a mix tends to rise to the surface of freshly placed concrete. Known also as water gain.
ได้รับชดใช้ค่าเสียหาย
ได้รับสิทธิ์
(english) A support contributes to keeping a structure in place by restraining one or more degrees of freedom. In a structural model, supports represent boundary entities which are not included in the model itself, e.g., foundations, abutments, or the earth itself. For each restrained translation degree of freedom at a support, there is a corresponding reaction force; for each restrained rotation degree of freedom, there is a reaction moment.
(Software Engineering) the person(s) who have responsibility for deciding whether a change is to be made
(english) The mineral zircon silicate, ZrSiO4, a very high melting point acid refractory material used as a molding material in steel foundries.