ผลการค้นหา

pump through* *pump through *pump through*

ค้นเจอ 108 รายการ

clearance through custom

การออกของผ่านศุลกากร

BLEED-OFF

(english) To divert a specific, controllable portion of pump delivery directly to reservoir.

Biogeochemical cycle

(Environmental Engineering) The cycle of elements through the biotic and abiotic environment.

Shear stress:

(english) Stress acting parallel to an imaginary plane cut through an object.

Bent Axis Pumps

(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.

Capillarity

(Concrete Engineering) A wick-like action whereby a liquid will migrate vertically through material, in a upward direction; as oil in a lamp travels upward through the wick,

Blind Bole

(english) A hole made in a workpiece that does not pass through it.

Burnishing 2

(english) Smoothing surfaces through friction between the material and material such as hardened metal media.

Boss

(english) A projection or an enlarged section of a casting through which a hole may be machine.

Breaker

(english) Uncoiler rolls through which the strip passes; composed of a mandrel and leveling rolls which unwind the strip prior to processing through the Pickler. Breaker rolls assist in breaking up the Hot Mill surface scale.

Ball Piston Pumps

(english) The Ball Piston Pump is a very simple pump design. It has a rotor which revolves around an internal stator. The rotor has twelve cylinders machined out of it, and each cylinder has a ball inside which can slide in and out of the cylinder.

Bridle

(english) A set of rolls used to maintain tension on the strip as it goes through the line.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด