ค้นหา "cut in front" ใน คำศัพท์ช่างภาษาอังกฤษ

ผลการค้นหา

ค้นเจอ 379 รายการ

Shear stress:

(english) Stress acting parallel to an imaginary plane cut through an object.

Bottom Roll

(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Base Metal

(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Bath

(english) Molten metal on the hearth of a furnace, in a crucible, or in a ladle

Photochemical pollutants

(Environmental Engineering) Chemicals which react photochemically (in the presence of sunlight) to destroy ozone in the stratosphere.

CFCs

(Environmental Engineering) Chlorofluorocarbons, chemicals which result in a depletion of the ozone layer in the upper atmosphere.

specified in the Contract

ระบุในสัญญา

clay lumps in aggregates

กองดินซึ่งไหลไปรวมกันเป็นก้อนจับตัวแน่น

in whole or partial

ทั้งหมดหรือบางส่วน

Flocculant settling

(Environmental Engineering) Settling in which particle concentrations are sufficiently high that particle agglomeration occurs. This results in a reduction in the number of particles and an increase in average particle mass. As agglomeration occurs higher settling velocities result.

Denitrification

(Environmental Engineering) The anoxic biological conversion of nitrate to nitrogen gas. It occurs naturally in surface waters low in oxygen, and it can be engineered in wastewater treatment systems.

Sulfate Attack

(Concrete Engineering) Deleterious chemical and/or physical re-action between sulfates in ground water or soil and certain constituents in cement, which result in expansion and disruption of the concrete.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด