ผลการค้นหา

ค้นเจอ 89 รายการ

Band Wareroom

(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).

Bending Angle

(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

backed-up

(การพิมพ์) แผ่นกระดาษที่พิมพ์ทั้งสองหน้า backed - up erong = แสดงว่าพิมพ์ผิด

Tesla

นักวิทยาศาสตร์ไฟฟาชาวอเมริกันผู้คิดค้นทำขดลวดเพิ่มความถี่ของไฟฟ้าสลับ เรียกว่า Tesla coil และหลอดไฟ Tesla tube (ค.ศ. 1852)

Buckles

(english) Appeaars like a series of waves and are created during rolling as a result of mechanical misalignment or cross-section irregularities in supply coil.

Back-up Balance

(english) Cylinders that supply the force used to hold the back-up rolls up in place.

Burr Mashers

(english) Devices used to remove build up on edge of strip after the slitting process.

Baller Stick

(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Zirconia

(english) ZrO2 an acid refractory up to 2500 B0C (4532 B0F) having good thermal shock resistance and low electrical resistively.

In situ treatment

(Environmental Engineering) Treatment of a waste in place, as opposed to pumping or digging the waste up and then treating it.

Burnt Rubber

(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.

Z-Mill

(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด