ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) Reversing the wrap of a coil putting the top surface on the bottom.
ขดลวดแรงไฟสูง ซึ่งเป็นตัวต้นรับกระแสไฟเข้าไปก่อน secondary winding (ความหมายเดียวกับ primary coil)
(english) Also BY-COIL. Tin Mill term. Customers buy "by coil" or "bi-coil" rather than cut sheets
(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).
(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.
(english) Stiff bright wire of hard temper. Normally wire is drawn down to size without annealing.
นักวิทยาศาสตร์ไฟฟาชาวอเมริกันผู้คิดค้นทำขดลวดเพิ่มความถี่ของไฟฟ้าสลับ เรียกว่า Tesla coil และหลอดไฟ Tesla tube (ค.ศ. 1852)
(english) Appeaars like a series of waves and are created during rolling as a result of mechanical misalignment or cross-section irregularities in supply coil.
(english) Sinking a pattern down into the sand to the desired position and ramming the sand around it.
(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.
(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.
(english) 1) A furnace in which solid fuel (limestone, coke, iron ore) is combined with high-pressure, hot air blast (120,000 psi) to smelt ore in a continuous process (They are never stopped. They can be slowed down or idled). A Blast Furnace in the iron and steel industry is used to produce liquid iron.