ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
รถบดถนน ที่ใช้เครื่องยนต์ดีเซล
ลูกกลิ้งตีนแกะ : เครื่องมือชนิดหนึ่งที่ใช้ในการบดอัดดิน มีลักษณะเป็นลูกกลิ้งมีผิวหน้าเป็นปุ่มยื่นออกมาคล้ายตีนแกะ
กลไกแม่เหล็กซึ่งมีความเที่ยงตรงและควบคุมได้เองแบบอัตโนมัติของวงจรกระแสไฟฟ้า
(english) "Fine particles of limestone (flux) and iron ore are difficult to handle and transport because of dusting and decomposition, so the powdery material usually is processed into larger pieces. The raw material's properties determine the technique that is used by mills. 1) SINTER Baked particles that stick together in roughly one-inch chunks. Normally used for iron ore dust collected from the blast furnaces. 2) PELLETS Iron ore or limestone particles are rolled into little balls in a balling drum and hardened by heat. 3) BRIQUETTES Small lumps are formed by pressing material together. Hot Iron Briquetting (HBI) is a concentrated iron ore substitute for scrap for use in electric furnaces.
(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.
เหล็กรีดเย็น
(โลหะ) ซึ่งรีดยังกำลังร้อน ๆ เช่น โลหะที่รีดออกมาเป็นรูปหน้าตัดต่าง ๆ ในขณะที่ยังร้อน ๆ อยู่
(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.
ที่อัดอากาศหรือน้ำมันเชื้อเพลิง ในห้องผสมอากาศกับน้ำมันเชื้อเพลิงคาบูเรเตอร์ (เรียกทั่วๆ ไปว่า โช๊คน้ำมันมีหน้าที่ปิดเปิดลิ้นรับน้ำมัน และอากาศอยู่ในคาบิว)
(Software Engineering) the collection of programs, documents and data that must be controlled when changes are to be madeConfiguration audit
คันบังคับเครื่องจักรหรือเครื่องยนต์ด้วยมือ เช่น ห้ามล้อมือ
แผ่นหรือแท่งโลหะที่รีดเป็นรูปตามต้องการ