ผลการค้นหา

ค้นเจอ 410 รายการ

Fixed connection:

(english) In two dimensions, a fixed connection between two members restrains all three degrees of freedom of the connected member with respect to one another. A fixed connection is sometimes called a rigid connection or moment-resisting connection.

Bend Test

(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Blooming-Mill

(english) A mill used to reduce ingots to blooms, billets slabs, sheet-bar etc.,

BLEED-OFF

(english) To divert a specific, controllable portion of pump delivery directly to reservoir.

Portability

(Software Engineering) the ability to transport software from one target environment to another

Backwardation

(english) Market condition where the spot, or current price for a metal is higher than the three-month delivery price. This usually indicates immediate demand is perceived to be stronger than long-term demand. Not considered to be a "normal" market state (See Contango).

Bridling

(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.

be discharged from

ถูกปลดเปลื้องภาระจาก

Mass balance

(Environmental Engineering) An organized accounting of all inputs and outputs to an arbitrary but defined system. Stated in other terms, the rate of mass accumulation within a system is equal to the rate of mass input less the rate of mass output plus the rate of mass generation within the system.

Construction Joint

(Concrete Engineering) The contact between the placed concrete and concrete surfaces, against or upon which concrete is to be placed and to which new concrete is to adhere, that has become so rigid that the new concrete cannot be incorporated integrally by vibration with that previously placed. Unformed construction joints are horizontally placed or nearly so.

Quality

(Software Engineering) the degree to which a product conforms to both explicit and implicit requirements

Burn-On-Sand

(english) Sand adhering to the surface of the casting that is extremely difficult to remove.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด