ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(เครื่องยนต์) การใช้ให้สึกจนเข้าที เช่น เครื่องยนต์ใหม่ จะต้องใช้ให้ส่วนเสียดสีต่าง ๆ สึกจนเข้าที่ของมันเครื่องยนต์จึงจะใช้งานได้เต็มที่
เพิ่มแสงเฉพาะแห่ง [การพิมพ์, วิชาถ่ายภาพ]: ทำให้เช้าที่ [อิเล็กทรอนิกส์]
เข้าเกียร์
(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.
(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.
วิธีการอนุญาโตตุลาการ ในการตัดสินข้อเรียกร้องหรือข้อพิพาท โดยฝ่ายหนึ่งไม่ได้มาร่วมอยู่ด้วย
(Environmental Engineering) The anoxic biological conversion of nitrate to nitrogen gas. It occurs naturally in surface waters low in oxygen, and it can be engineered in wastewater treatment systems.
(Concrete Engineering) Deleterious chemical and/or physical re-action between sulfates in ground water or soil and certain constituents in cement, which result in expansion and disruption of the concrete.
(Software Engineering) the creation of a mock-up of an application
(english) The bulk of the sand in the flask. The sand compacted on top of the facing sand that covers the pattern.
(Environmental Engineering) Settling in which individual particles settle independently, neither agglomerating or interfering with the settling of the other particles present. This occurs in waters with a low concentration of particles.
(Concrete Engineering) Particle distribution of granular materials among various sizes; for concrete material normally designated as gradation. Usually expressed in terms of cumulative percentages smaller or larger than each of a series of sieve openings or percentages between certain ranges of sieve openings.