ผลการค้นหา

ค้นเจอ 1,070 รายการ

Bending Angle

(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

BETA RATIO (#)

(english) The amount, expressed as a ratio, of particles in a fluid stream upstream of a filter, after the fluid posses through a filter, divided by the amount of particles downstream, for a particular size particle.

Bedding a Core

(english) Resting an irregularly shaped core on a bed of sand for drying.

Couple:

(english) A system of forces composed of two equal forces of opposite direction, offset by a distance. A couple is statically equivalent to a moment whose magnitude equals the magnitude of the force times the offset distance.

Backoff

Removal of part of coil from entry end of unit; may be necessitated by a defect in coil or by a wreck in the mill, etc. Backoff weight is the part of the coil that is removed and not finished/produced.

Activation

(english) The changing of the passive surface of a metal to a chemically active state. Contrast with passivation.

Stakeholders

(Software Engineering) any person of group that has a stake in the successful completion of a software project

Change of State

(Concrete Engineering) The process whereby liquid is heated to the point of evaporation changing the liquid into a gas the condensation of a gas on a cooler surface returning it from gaseous to liquid form.

Bevel

(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.

Project scope

(Software Engineering) a statement of basic requirements of the software to be built

Boss

(english) A projection or an enlarged section of a casting through which a hole may be machine.

Strength:

(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด