ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) An accident caused by the failure of the walls of the hearth of the furnace resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.
(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.
(Environmental Engineering) A level in the food chain. The first trophic level consists of the primary producers, autotrophs. The second trophic level is vegetarians which consume autotrophic organisms.
(english) The customer buys by the actual (scale) weight of the steel. The theoretical weight is used in estimating, however, it is not to be used for billing.
(Concrete Engineering) The pressure exerted by a vapor that is calculated based upon relative humidity and temperature. The higher the humidity and higher temperature, in degrees Fahrenheit, the greater the vapor pressure exerted.
(Environmental Engineering) The process of returning residuals back to the environment in a form which will have the minimal or reduced negative environmental impacts.
(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.
(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.
(Environmental Engineering) The amount of oxygen required to oxidize any organic matter in the water using harsh chemical conditions.
(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.
(Environmental Engineering) The elimination or reduction of the waste at the source by modification of the actual process which produces the waste.
(Software Engineering) when a defect is introduced early in the software process and remains undetected, it often is amplified into multiple defects later in the software process