ค้นหา "give in" ใน คำศัพท์ช่างภาษาอังกฤษ

ผลการค้นหา

ค้นเจอ 335 รายการ

Bending

(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.

Flocculant settling

(Environmental Engineering) Settling in which particle concentrations are sufficiently high that particle agglomeration occurs. This results in a reduction in the number of particles and an increase in average particle mass. As agglomeration occurs higher settling velocities result.

Give the right of access to the site

ให้สิทธิในการเข้าพื้นที่ก่อสร้าง

give the right to access/possession of site

ให้สิทธิในการเข้าครอบครองพื้นที่ก่อสร้าง

Denitrification

(Environmental Engineering) The anoxic biological conversion of nitrate to nitrogen gas. It occurs naturally in surface waters low in oxygen, and it can be engineered in wastewater treatment systems.

Sulfate Attack

(Concrete Engineering) Deleterious chemical and/or physical re-action between sulfates in ground water or soil and certain constituents in cement, which result in expansion and disruption of the concrete.

Plastic Consistency

(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.

Trace contaminants

(Environmental Engineering) Contamination found in trace (very low) levels.

Cybernetic

(Environmental Engineering) Systems which change in response to feedback.

Base Metal Contamination

(english) Dirt or other impurities in the steel strip.

Burnthrough

(english) In shell molding, resin burned out too soon.

Boring Tool

(english) A cutting tool in which the tool bit,the boring bar and in some cases the tool holder are incorporated.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด