ค้นหา "cut the hair" ใน คำศัพท์ช่างภาษาอังกฤษ

ผลการค้นหา

ค้นเจอ 594 รายการ

Bottom Up

(english) Reversing the wrap of a coil putting the top surface on the bottom.

Project planning

(Software Engineering) the activity that creates the Project Plan

Brinell Hardness

(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

Bearing Strength

(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

Bottom Die

(english) The stationary half-die.

THE EMPLOYER

ผู้ว่าจ้าง

By Coil

(english) Selling term which refers to product sold in the form of a coil vs. cut plate. "Bi Coil" is also used in production to refer to coils vs. cut plate

Back Rake

(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.

Bottom Roll

(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Software metrics

(Software Engineering) quantitative measures of the process or the product

Burr

(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Billet container

(english) The part of the extrusion press into which the billet to be extruded is placed.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด