ผลการค้นหา

ค้นเจอ 696 รายการ

Aging 2

(english) A change in properties that occurs at ambient or moderately elevated temperatures after hot working or a heat treating operation (quench aging in ferrous alloys), or after a cold working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but does not involve a change in chemical composition. In a metal or alloy, a change in properties that generally occurs slowly at room temperature and more rapidly at higher temperatures.

Receiving water quality standards

(Environmental Engineering) Standards which require a discharger to maintain a certain quality level in the receiving water.

Truck Mixer

(Concrete Engineering) A concrete mixer capable of mixing concrete in transit when mounted on a truck chassis.

Backward Extrusion

(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.

Classes - a basic construct in object

(Software Engineering) oriented methods that categorizes elements of the problem

Slump Cone

(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.

Software problem report

(Software Engineering) a report of a defect

Bamboo Grain Structure

(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.

Condensation

(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.

Basic Steel

(english) Steel melted in a furnace with a basic bottom and lining and under a slag containing an excess of a basic substance such as magnesia or lime.

Concentrated force:

(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.

Bake

(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด