ผลการค้นหา

ค้นเจอ 397 รายการ

Bridling

(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.

be discharged from

ถูกปลดเปลื้องภาระจาก

Construction Joint

(Concrete Engineering) The contact between the placed concrete and concrete surfaces, against or upon which concrete is to be placed and to which new concrete is to adhere, that has become so rigid that the new concrete cannot be incorporated integrally by vibration with that previously placed. Unformed construction joints are horizontally placed or nearly so.

Quality

(Software Engineering) the degree to which a product conforms to both explicit and implicit requirements

Burn-On-Sand

(english) Sand adhering to the surface of the casting that is extremely difficult to remove.

Scope

(Software Engineering) a bounded statement of what must be accomplished

Accurate

(english) Conforms to a standard or tolerance.

Coagulation

(Environmental Engineering) Particle destabilization to enhance agglomeration.

Stucco

(Concrete Engineering) A portland cement mortar material that can be applied to the surface of any building or structure to form a hard and durable covering for the exterior wails or other exterior surfaces.

Blackening Scab

(english) A form of casting defect related to an improper coating rather than to the sand.

Maintenance

(Software Engineering) the activities associated with changes to software after it has been delivered to end-users

Bend Test

(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด