ค้นเจอ 59 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "*pass*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

idle passage

ช่องทางเดินน้ำมันเชื้อเพลิงของท่อนมหนูเดินเบาคาบูเรเตอร์

BURST PRESSURE

(english) The level of pressure at which a component, pipe, tube, hose or other fluid passage will burst during application of internal pressure. Normally 2.5 - 4.0 times working pressure.

compass saw

เลื่อยมือชนิดใบเลื่อยเรียวเล็ก ใช้เลื่อยแผ่นไม้ให้เป็นวงกลมหรือโค้ง

passage

ทางผ่าน

Activation

(english) The changing of the passive surface of a metal to a chemically active state. Contrast with passivation.

pencil compasses

วงเวียนเขียนแบบ ซึ่งขาข้างหนึ่งเป็นที่จับดินสอ อีกขอหนึ่งเป็นเหล็กปลายเรียวแหลม

compasses

วงเวียน

Bandsaw

(english) A power saw, the blade of which is a continuous,narrow,steel band having teeth on one edge and passing over two large pulley wheels.

by pass

ทางเบี่ยง ทางเลี่ยงเมือง ท่อเลี่ยง

overpass

ทางข้าม, สะพานลอย

compass-card

หน้าปัทม์เข็มทิศ

Bent Axis Pumps

(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z