ค้นเจอ 1,928 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "*K*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

HRM High Reactivity Metakaolin

(Concrete Engineering) Refined form of an ASTM C618, Class N (natural) pozzolan. A high performance, mineral admixture, similar in performance to silica fume, additionally comparable in cost. Pure white powdered in form will, not effect the natural color or darken concrete as silica fume does. Suitable for high-performance color matching in architectural concrete. Dosage at 5% to 10%, of cement by weight. No bleed water, better finishability, more creamy, cleanup is easier with slightly higher 28 day strengths and 25% - 35% less plasticizer is required than silica fume.

Blow Back

(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

tail stock

(กลจักร) หางศูนย์ในแท่นกลึง ซึ่งเลื่อนถอยหน้าถอยหลังได้ ซึ่งต่างกับ nead stock จะเป็นศูนย์ติดตั้งอยู่กับที่

Bench Work

(english) Work done primarily at a bench with hand tools. Occasionlly suplemented by small power-driven tools.

BACK-UP RING

(english) A fabric or plastic device that is used with an o-ring or other gasket to prevent extrusion of the o-ring or gasket into an adjacent space or crevice

Back Rake

(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.

break front

ตู้ที่แบ่งออกเป็น 3 ตอน ในแนวตั้งตอนกลางป่องออกเพื่อให้ความลึกมากกว่า จุของได้มากกว่า จุของได้มากขึ้น ชินเปนเดลเรียก library bookcase

Rock Pocket

(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.

chucking

(เครื่องจักร) การกลึงวัตถุใด ๆ โดยใช้วัตถุที่จะกลึงนั้นสวมเข้าไปกลางงล้อ Chuck

Baked Strength

(english) Compressive, shear, tensile or transverse strength of a mold sand mixture when baked at a temperature above 231 B0F (111 B0C) and then cooled to room temperature.

K

อักษรย่อของคำว่า Karat กะหรัด

koa

(ไม้) ตระกูล Acacikoa ไม้ชนิดนี้มี่อยู่ในหมู่เกาะฮาไวเท่านั้น น้ำหนัก 52 ปอนด์ ต่อฟุตลูกบาศก์ เนื้อไม้สีน้ำตาลอ่อน ใช้ทำเครื่องเรือนและอื่นๆ รวมทั้งตัวเครื่องดนตรีต่างๆ


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z