ผลการค้นหา

thrust on* *thrust on *thrust on*

ค้นเจอ 102 รายการ

Unit testing

(Software Engineering) part of the testing strategy that focuses on tests to individual program components

Smoke testing

(Software Engineering) an integration testing approach that constructs and tests software on a daily basis

Bridle Unit

(english) A three-roll cluster used to control line tension at strategic locations on the line.

f.o.b

ย่อมาจากคำเต็มว่า free on board คือ ผู้ขายออกค่าขนส่งให้จนถึงลงเรือสินค้าหรือถึงรถบรรทุก

Blue Print

(english) A pen or ink line drawing reproduced (printed) on sensitized paper by direct exposure.

Burr Mashers

(english) Devices used to remove build up on edge of strip after the slitting process.

Adsorption Water

(Concrete Engineering) Water held on surfaces in a material by either physical and/or chemical forces.

Bath

(english) Molten metal on the hearth of a furnace, in a crucible, or in a ladle

BACK PRESSURE

(english) The level of pressure on the return or downstream side of a device or system.

Bent Axis Pumps

(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.

Truck Mixer

(Concrete Engineering) A concrete mixer capable of mixing concrete in transit when mounted on a truck chassis.

Burnishing

(english) Developing a smooth finish on a metal by tumbling or rubbing with a polished hand tool.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด