ผลการค้นหา

on the take* *on the take *on the take*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 598 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "on the take"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Inertial Force:

(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.

turn on

เปิด (ไฟ, ก๊อกน้ำหรือน้ำมัน)

switch on

เปิดไฟ

Bridle Snubber

(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.

Source reduction

(Environmental Engineering) The elimination or reduction of the waste at the source by modification of the actual process which produces the waste.

Elastic Shortening

(Concrete Engineering) The shortening of a member in pre-stressed concrete which occurs on the application of forces induced by prestressing.

Reaeration

(Environmental Engineering) The dissolving of molecular oxygen from the atmosphere into the water.

A Elevation

(English) The top level of the boiler firebox where four oil guns are located. The oil guns are used to produce steam and maintain pressure while the boiler is on oil fire.

Line of Action:

(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.

Saponification

(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.

Project planning

(Software Engineering) the activity that creates the Project Plan

Bearing Strength

(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด