ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 571 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "into the bargain"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Bearing Strength

(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

Bottom Die

(english) The stationary half-die.

Ac3

(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.

THE EMPLOYER

ผู้ว่าจ้าง

Back Rake

(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.

Bottom Roll

(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Software metrics

(Software Engineering) quantitative measures of the process or the product

Butt end

(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.

Back End

(english) 1) Usually refers to the entry end of process lines. 2) The outside lap 2) of the produced coil, or the inside lap of the consumed coil.

Refuse derived fuel (RDF)

(Environmental Engineering) A fuel derived from the combustible portion of municipal solid waste. The fuel is often processed into small briquettes, similar in size to charcoal.

Burr

(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Temper

(Concrete Engineering) The addition of water to the cement mix whether at the batch plant, during transit or at the jobsite to achieve the specified water to cement ratio.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด