ค้นเจอ 592 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "be at the helm"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Bamboo Grain Structure

(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.

Gravity:

(english) An attractive force between two objects; each object accelerates at a rate equal to the attractive force divided by the object's mass. Objects near the surface of the earth tend to accelerate toward the earth's center at a rate of ; this value is often called the gravitational constant and denoted as g.

Inertia:

(english) The tendency of an object at rest to remain at rest, and of an object in motion to remain in motion.

Inertial Force:

(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.

Bridle Snubber

(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.

Recycling

(Environmental Engineering) The recovery and reuse of a product which would otherwise be thrown away.

Blue Brittleness 2

(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.

Thermocline

(Environmental Engineering) The depth at which an inflection point occurs in a lake temperature profile.

Bridle Unit

(english) A three-roll cluster used to control line tension at strategic locations on the line.

Accm

(english) In hypereutectoid steel, the temperature at which cementite goes into complete solution with austenite.

sparking at brushes

ประกายไฟที่เกิดขึ้นระหว่างขั้วไฟสลับกับหน้าแปรงถ่าน สาเหตุเกิดจากมีฝุ่นละอองหรือสิ่งสกปรกจับบนขั้วไฟสลับ หรือเกิดจากการสัมผัสระหว่างแปรงกับขั้วไฟไม่ถูกต้อง

At Own Risk

รับความเสี่ยงเอง


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z