ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 574 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "under the weather"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Inelastic:

(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Bridle Snubber

(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.

Source reduction

(Environmental Engineering) The elimination or reduction of the waste at the source by modification of the actual process which produces the waste.

Reaeration

(Environmental Engineering) The dissolving of molecular oxygen from the atmosphere into the water.

Plane of Weakness

(Concrete Engineering) The plane along which a structure under stress will tend to fracture; may exist because of the nature of the structure and its loading, by accident, or by design.

Line of Action:

(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.

Bottom Up

(english) Reversing the wrap of a coil putting the top surface on the bottom.

Project planning

(Software Engineering) the activity that creates the Project Plan

Brinell Hardness Test

(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

Spall

(Concrete Engineering) A fragment, usually of flaky shape, detached from a larger mass by pressure, expansion from within the larger mass, a blow, or by the action of weather.

Brinell Hardness

(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

Bearing Strength

(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด