ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.
(Environmental Engineering) The conversion of atmospheric (or dissolved) nitrogen gas into nitrate by microorganisms.
(english) Ingot mold, with the top constricted; used in the manufacture of capped steel, the metal in the constriction being covered with a cap fitting into the bottle-neck, which stops rimming action by trapping escaping gases.
(english) In hypereutectoid steel, the temperature at which cementite goes into complete solution with austenite.
(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.
(Environmental Engineering) The elimination or reduction of the waste at the source by modification of the actual process which produces the waste.
(Concrete Engineering) The weight of dry aggregate rodded into a cylindrical container of diameter approximately equal to the height, each of 3 layers rodded 25 times, and the excess aggregate struck off level with the top of the container
(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.
(Software Engineering) an activity that translates the data model developed during analysis into implementable data structures
(Concrete Engineering) The process whereby liquid is heated to the point of evaporation changing the liquid into a gas the condensation of a gas on a cooler surface returning it from gaseous to liquid form.
(english) Reversing the wrap of a coil putting the top surface on the bottom.
(Software Engineering) the activity that creates the Project Plan