ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) The tool used to spot (or position) the rail cars for unloading. It is located on the north end of the unloading area.
(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.
(english) The level of pressure on the return or downstream side of a device or system.
(english) A location on the strip where coating did not adhere.
(english) The temperature at which austenite begins to form on heating.
(english) Chemical symbol for Beryllium
(english) The angular surface ground back from the cutting edge of cutting tools. On lathe cutting tools. The rake is positive if the face slopws down from the cutting edge toward the shank, and negative if the face sloopes upward toward the shank.
(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.
(Software Engineering) the collection of programs, documents and data that must be controlled when changes are to be madeConfiguration audit
(Software Engineering) techniques for process improvement that are based on measurements of the product and the process
(english) The customer buys by the actual (scale) weight of the steel. The theoretical weight is used in estimating, however, it is not to be used for billing.
(Environmental Engineering) The placement of wastes into the land under controlled conditions to minimize their migration or effect on the surrounding environment.