ผลการค้นหา

ค้นเจอ 52 รายการ

long span structure

โครงสร้างช่วงยาว

Pumping (of Pavements)

(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.

Yield stress:

(english) A material loaded beyond its yield stress, no longer exhibits linear elastic behavior. Metals, particularly mild steel, generally have a very well defined yield stress compared to other materials. Yield stress is sometimes called yield strength.

chaise longue (long chair)

เก้าอี้ยาวขนาด 3 ใน 4 ส่วน ยาวพอนอนได้ หรือยาวขนาดเก้าอี้นั่ง 2 คน ต่อด้วยขนาดของม้านั่งอีก 1 ตัว มีพนักด้านสกัดใช้นอนเล่น ใช้กันมากในฝรั่งเศษกลางศตวรรษที่ 18

Broaching 2

(english) Multiple shaving, accomplished by pushing a tool with stepped cutting edges along the piece, particularly through holes.

Concentrated force:

(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.

long boat

เรือบดลำใหญ่ที่ใช้อยู่ในเรือกำปั่น

Baller Stick

(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Batch Anneal

(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Plane of Weakness

(Concrete Engineering) The plane along which a structure under stress will tend to fracture; may exist because of the nature of the structure and its loading, by accident, or by design.

longitudinal section

รูปตัดตามยาว

long distance telephone

โทรศัพท์ทางไกล

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด