ผลการค้นหา

ค้นเจอ 27 รายการ

Milestones

(Software Engineering) a point in time that is used to indicate progress during a project

Data design

(Software Engineering) an activity that translates the data model developed during analysis into implementable data structures

Adiabatic Curing

(Concrete Engineering) The maintenance of ambient conditions during the setting and hardening of concrete so that heat is neither lost nor gained from the surroundings of the concrete.

BURST PRESSURE

(english) The level of pressure at which a component, pipe, tube, hose or other fluid passage will burst during application of internal pressure. Normally 2.5 - 4.0 times working pressure.

Rock Pocket

(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.

Runoff

(Environmental Engineering) The water that flows overland to lakes or streams during and shortly after a precipitation event.

Fluidization

(Environmental Engineering) The suspension of particles by sufficient upward velocity of the fluid. During fluidization the gravity force is overcome by a combination of buoyancy and fluid friction.

Blush

(english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive.

Non-agitating Unit

(Concrete Engineering) A truck-mounted unit for transporting ready-mixed concrete short distances, not equipped to provide agitation (slow mixing) during delivery.

Age Hardening

(english) Hardening by aging, usually after rapid cooling or cold working. The term as applied to soft, or low carbon steels, relates to a wide variety of commercially important, slow, gradual changes that take place in properties of steels after the final treatment. These changes, which bring about a condition of increased hardness, elastic limit, and tensile strength with a consequent loss in ductility, occur during the period in which the steel is at normal temperatures.

Base

(english) The steel or concrete pedestal on which the coils are stacked during the batch annealing process.

Overvibration

(Concrete Engineering) Excessive vibration of freshly mixed concrete during placement-causing segregation.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด