ผลการค้นหา

ค้นเจอ 895 รายการ

Consistency

(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

Concentrated force:

(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.

moisture content

ความชื้น : ปริมาณน้ำในวัสดุซึ่งแสดงอยู่ในรูปของเปอร์เซ็นต์โดยน้ำหนัก เรียกอีกอย่างว่า water content

Project control

(Software Engineering) the control of quality and change

Constructiou Division

กองก่อสร้าง (ในส่วนราชการ) College of Cesigns and Construction = วิทยาลัยวิชาการก่อสร้าง (บางพลัด ธนบุรี) Division of Cesigns and Construction = กองออกแบบและก่อสร้าง (ในส่วนราชการของกรมโยธาเทศบาล) School of Building Construction = โรงเรียนช่างก่อสร้าง

AAC - Autoclaved Aerated Concrete

(Concrete Engineering) Exceptionally lightweight precast concrete with high thermal qualities and fire resistence. Suitable for cutting with ordinary hand tools. Mix design is composed of portland cement, sand or siliceous material, lime, gypsum, finely powdered aluminum, and water. Initial mix is a combination of portland cement, sand, lime and gypsum to produce a slurry. Finely powdered aluminum mixed into a paste is added prior to placement into large, rail-like forms. The finely powdered aluminum reacts with the alkaline components of the cement and lime to produce hydrogen gas, which increases the volume approximately five times producing a uniformly, dispersed cellular structure. Units are cut to required shape. Units are placed in an autoclave, an enclosed pressurized chamber, and steam cured at 3500 F. Approximately 80% of the ultimate volume consists of air voids.

Cement Content

(Concrete Engineering) A quantity of cement contained in a unit volume of concrete or mortar, ordinarily expressed as pounds, barrels, or bags per cubic yard.

contact points

ปุ่มโลหะสัมผัส ( มักเรียกทับศัพท์ว่า contact ) ชิ้นเล็กมากๆ เป็นดลหะแผ่นกลมหรือเป็นปุ่มของ platinum หรือเหล็กกล้าผสมโลหะอื่นใช้เป็นจุดสัมผัสตัดและเปิดวงจรกระแสให้ต่ำ

Consolidation

(Concrete Engineering) Compaction usually accomplished by vibration of newly placed concrete to minimum practical volume, to mold it within form shapes and around embedded parts and reinforcement, and to eliminate voids other than entrained air.

Preplaced Concrete

(Concrete Engineering) Concrete manufactured by placing clean, graded coarse aggregate in a form and later injecting a portland cement-sand grout under pressure, to fill the voids.

Configuration

(Software Engineering) the collection of programs, documents and data that must be controlled when changes are to be madeConfiguration audit

Secondary treatment

(Environmental Engineering) In wastewater treatment, the conversion of the suspended, colloidal and dissolved organics remaining after primary treatment into a microbial mass with is then removed in a second sedimentation process. Secondary treatment included both the biological process and the associated sedimentation process.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด