ผลการค้นหา

ค้นเจอ 29 รายการ

quarter bend

ลักษระโค้งเสยว ในส่วนของวงกลม 90 ดีกรี เช่น ลักษณะโค้งของท่อน้ำที่ทำมุมฉาก 90 องศา

Burr

(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Black Oil Tempered Spring Steel Strip (Scaleless Blue)

(english) A flat cold rolled usually .70/.80 medium high carbon steel strip, blue-black in color, which has been quenched in oil and drawn to desired hardness. While it looks and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not have the same degree of spring-back.

Bending

(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.

Bending Moment Diagram

แผนภาพโมเมนต์ดัด

bending test

ทดสอบความเหนียว

cold bend

การดัดโค้งเย็น

knuckle bend

โค้งที่มีรัศมีมีสั้น ๆ

Flexure:

(english) Bending deformation, i.e., deformation by increasing curvature.

Flexural Strength

(Concrete Engineering) A property of a solid that indicates its ability to withstand bending.

Bending moment:

(english) A system of internal forces whose resultant is a moment. This term is most commonly used to refer to internal forces in beams.

Bending Strength

(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด