ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) Machine located at each delivery reel to automatically place circumference bands around completed coils.
(english) Devices used to remove build up on edge of strip after the slitting process.
(english) Similar to the concept of center of gravity, except that it applies to a two dimensional shape rather than an object. For a given shape, the centroid location corresponds to the center of gravity for a thin flat plate of that shape, made from a homogeneous material.
(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.
ให้สิทธิในการเข้าพื้นที่ก่อสร้าง
ให้สิทธิในการเข้าครอบครองพื้นที่ก่อสร้าง
An informal measure of the ease with which a user interface can be learned and applied with efficiency and without errors
(english) A rotating drum that is used for adding moisture to the sinter mix in the Blast Furnace. Also, it enhances a balling action where the smaller sized materials adhere to larger materials.
(Software Engineering) any application that delivers meaningful content or functionality to end users via the Web.
(english) A system of forces which is statically equivalent to a stress distribution over an area.
(english) Stiff bright wire of hard temper. Normally wire is drawn down to size without annealing.
(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.