ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 395 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "over and above"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Blast Furnace 2

(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.

Break Test (for tempered steel)

(english) A method of testing hardened and tempered high carbon spring steel strip wherein the specimen is held and bent across the grain in a vice-like calibrated testing machine. Pressure is applied until the metal fractures at which point a reading is taken and compared with a standard chart of brake limitations for various thickness ranges.

Box Annealing

(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.

Bedding

(english) Sinking a pattern down into the sand to the desired position and ramming the sand around it.

Wastewater

(Environmental Engineering) Consumed or used water from a municipality or industry that contains dissolved and/or suspended matter.

Metabolism

(Environmental Engineering) The processes which sustain an organism, including energy production, synthesis of proteins for repair and replication.

Runoff

(Environmental Engineering) The water that flows overland to lakes or streams during and shortly after a precipitation event.

dado

รางเข้าไม้, ร่องระหว่างไม้สองแผ่นสวมกันได้สนิท ที่เรียกว่า dado and rabbetระยะทางจากพื้นถึงระดับเอว (ในผนังอาคารด้านใน)

Unified process

(Software Engineering) a "use-case driven, architecture-centric, iterative and incremental" software process that emphasizes the use of UML notation

Extreme programming

(Software Engineering) an agile process model that emphasizes scenario-based planning, incremental delivery, refactoring, pair programming and continuous testing.

Back-up Roll

(english) 1) Roll used as a support roll mainly for plater rolls. 2) Two rolls, one on top and one on bottom of the two work rolls which apply pressure and reduce the flexing of the work rolls.

Bed-In

(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด