ผลการค้นหา

ค้นเจอ 1,061 รายการ

Acid

(english) 1) A solution or liquid with a pH less than 7, 2) term applied to slags, refractors, and minerals containing a high percentage of silica.

Bending Angle

(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Time-boxing

(Software Engineering) a project scheduling and control technique that establishes time boundaries for the completion of a specific project task

Chemical fixation (or stabilization/solidification)

(Environmental Engineering) A term for several different methods of chemically immobilizing hazardous materials into a cement, plastic, or other matrix.

BREATHER

(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.

Calcine

(Concrete Engineering) To alter composition or physical state by heating to a specific temperature for a specific length of time.

Blast Furnace Slag

(Concrete Engineering) A non-metallic waste product developed in the manufacture of pig iron, consisting basically of a mixture of lime, silica and alumina, the same oxides that make up portland cement, but not in the same proportions or forms. It is used both in the manufacture of portland blast furnace slag cement and as an aggregate for lightweight concrete.

Brake

(english) A piece of equipment used for bending sheet; also called a bar folder. If operated manually, it is called a hand brake; if power driven, it is called a press brake.

Sack

(Concrete Engineering) A quantity of cement: 94 Ibs. in the United States, 87.5 Ibs. in Canada, for portland or air entraining portland cement, or as indicated on the sack for other kinds of cement.

Arbitration in the Absence of a Party

วิธีการอนุญาโตตุลาการ ในการตัดสินข้อเรียกร้องหรือข้อพิพาท โดยฝ่ายหนึ่งไม่ได้มาร่วมอยู่ด้วย

Stiffness:

(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Butcher Saw Steel

(english) A hardened, tempered, and polished high carbon spring steel strip material (carbon content is generally higher than that of a material used for wood band saw applications) with a Rockwell value of roughly C47/49.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด