ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Environmental Engineering) The ion or molecule which surrounds or complexes with the central atom or ion.
(Software Engineering) a point at which manager or the customer decides whether the project should proceed
(english) Brittleness exhibited by some steels after being heated to some temperature within the range of 300 (degrees) to 650 (degrees) F, and more especially if the steel is worked at the elevated temperature. Killed steels are virtually free of this kind of brittleness.
(Concrete Engineering) The colloidal gel (glue like) material that makes up the major portion of the porous mass of which hydrated cement paste is composed.
(Environmental Engineering) The removal of any dissolved or suspended contaminants beyond secondary treatment, often this is the removal of the nutrients nitrogen and/or phosphorus.
(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.
(english) Smoothing machined holes or outside surfaces of castings by drawing pushing on or more broaches (special cutting tools) through the roughed out hole.
(Concrete Engineering) The product obtained by intimately intergrinding or an intimate and uniform blending a mixture of granulated blast furnace slag and portland-cement clinker
(Environmental Engineering) The elimination or reduction of a waste prior to its generation. This is accomplished by process changes rather than waste treatment methods.
(Environmental Engineering) A reactor in which the microorganisms are attached to engineered surfaces within the reactor. Examples of attached growth reactors are the trickling filter and the rotating biological contactor. See suspended growth reactor.
(Software Engineering) a software engineering action that establishes the structure and workflow for a user interface; follows three "golden rules:" place the user in control, reduce the user's memory leoad, make the interface consistent.
(english) 1) Wooden separators which are used at both the bottom of a lift and between IPM's (bundles) of a lift. 2) The act of placing 4x4s between the lifts in the piler's box.