ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
วงจรสมบรูณ์, บางทีก็เรียกว่า chosed cirenit
(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.
ไนโตรเย็นเหลว
คววามเครียดเริ่มแรก
(english) A reaction is a force exerted by a support on an object: sometimes called support reaction. Using this definition, a reaction is an external force.
รอยต่อก่อสร้าง : รอยต่อที่กำหนดไว้ในงานคอนกรีตใน 1 วัน ใช้กับอาคารขนาดใหญ่ ซึ่งต้องเทคอนกรีตจำนวนมากติดต่อกัน และระยะเวลาที่ใช้ในการเทคอนกรีตนั้นเกินกว่าระยะเวลาการแข็งตัวของคอนกรีต (initial setting time)
หน่วยของกำลังอัด (อากาศ), หน่วยของกำลังดัน (กรแสไฟฟ้า)
Removal of part of coil from entry end of unit; may be necessitated by a defect in coil or by a wreck in the mill, etc. Backoff weight is the part of the coil that is removed and not finished/produced.
กรดดินประสิวชนิดที่มีไนโตรเจนน้อย
หน่วยวัดความร้อนของอังกฤษ เท่ากับจำนวนความร้อนที่ทำให้น้ำ 1 ปอนด์ ขึ้น 1 องศาฟาเรนไฮท์ (อักษรย่อ B.T.U.)
ข้อต่อรับกำลังจากเพลาชนิดที่หมุนไปได้รอบตัว, ข้อต่อรับกำลังจากเพลาเกียร์ส่งไปยังเพลาหน้าและหลังโดยทั่ว
(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.