ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 687 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "in the long run"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Mixing Speed

(Concrete Engineering) Rate of mixer drum rotation or that of the paddles in a pan, open-top, or trough type mixer, when mixing a batch; expressed in revolutions per minute (rpm) or in peripheral] feet per minute of A point on the circumference at maximum diameter.

Biogeochemical cycle

(Environmental Engineering) The cycle of elements through the biotic and abiotic environment.

Catabolism

(Environmental Engineering) The production of energy by the degradation of organic compounds.

Receiving water quality standards

(Environmental Engineering) Standards which require a discharger to maintain a certain quality level in the receiving water.

Carbonaceous biochemical oxygen demand (CBOD)

(Environmental Engineering) The amount of oxygen required to oxidize any carbon containing matter present in a water.

Total solids

(Environmental Engineering) (TS) is the amount of organic and inorganic matter which is contained in a water.

Ac3

(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.

Strain:

(english) The intensity of deformation at a point in an object. See normal strain and shear strain.

Backward Extrusion

(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.

Non-evaporable Water

(Concrete Engineering) The water in concrete which is irremovable by oven drying; chemically combined during cement hydration.

Balling Drum

(english) A rotating drum that is used for adding moisture to the sinter mix in the Blast Furnace. Also, it enhances a balling action where the smaller sized materials adhere to larger materials.

Batch Anneal

(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด