ค้นหา "in the days of" ใน คำศัพท์ช่างภาษาอังกฤษ

ผลการค้นหา

ค้นเจอ 1,075 รายการ

Jacking Force

(Concrete Engineering) The temporary force exerted by the jacking device which introduces tension into the tendons. Jacking Stress In prestress concrete, the maximum stress occurring in a tendon during stressing.

Blister 2

(english) A defect in metal, on or near the surface, resulting from the expansion of gas in a subsurface zone. Very small blisters are called pinheads or pepper blisters.

Suspended growth reactor

(Environmental Engineering) A reactor in which the microorganisms are suspended in the wastewater. Examples of suspended growth reactors are activated sludge reactors and anaerobic digesters. See attached growth reactor.

Cement Gel

(Concrete Engineering) The colloidal gel (glue like) material that makes up the major portion of the porous mass of which hydrated cement paste is composed.

Advanced wastewater treatment

(Environmental Engineering) The removal of any dissolved or suspended contaminants beyond secondary treatment, often this is the removal of the nutrients nitrogen and/or phosphorus.

Bevel

(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.

Blowhole 2

(english) A cavity which was produced during the solidification of metal by evolved gas, which in failing to escape is held in pockets.

Troposphere

(Environmental Engineering) The lower atmosphere, from the earth's surface to approximately 12 km. This portion of the earth's atmosphere contains about 95 percent of the atmospheric gases. The temperature gradually declines through this region.

Aluminous Cement

(Concrete Engineering) A hydraulic cement in which the principal constituents are calcium aluminates, instead of calcium silicates which comprise the major ingredients of portland cement. (See calcium aluminate cement)

Moment of inertia (I):

(english) Moment of inertia has two distinct but related meanings: 1) it is a property of a an object relating to the magnitude of the moment required to rotate the object and overcome its inertia. 2) A property of a two dimensional cross section shape with respect to an axis, usually an axis through the centroid of the shape.

Debugging

(Software Engineering) the activity associated with finding and correcting an error or defect - a lack of conformance to requirements found in the software after delivery to the customer

Dispersing Agent

(Concrete Engineering) An admixture capable of increasing the fluidity of pastes, mortars, or concretes by reduction of interparticle attraction.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด