ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) A machine in the Tin Mill that automatically puts bifluoride into the plater bath.
(english) A rib in the cope of a tight flask to help support the sand.
(english) Cylinders that supply the force used to hold the back-up rolls up in place.
(Software Engineering) the degree of detail with which some representation of the software is presented
(Software Engineering) the activity that enables a manager to understand the status of a project
(english) Sand adhering to the surface of the casting that is extremely difficult to remove.
(Environmental Engineering) A legal and controlled area for the placement of wastes into the ground.
(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.
(Environmental Engineering) The controlled aerobic degradation of organic wastes into a material which can be used for landscaping, landfill cover, or soil conditioning.
(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.
(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.
(Environmental Engineering) The potential of an atom to attract electrons when the atom is bonded in a compound. The scale is 0 to 4 with 0 being the most electropositive (low attraction) and 4 being the most electronegative (high attraction).