ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) 1) Roll used as a support roll mainly for plater rolls. 2) Two rolls, one on top and one on bottom of the two work rolls which apply pressure and reduce the flexing of the work rolls.
(Software Engineering) a formal technical review of the design
(Software Engineering) creates representation of the data and architecture
(Software Engineering) a hierarchical representation of the categories of users that will interact with any type of software
(Environmental Engineering) The mass of the compound which will produce one mole of available reacting substance. Thus, for an acid, this would be the mass of acid which will produce one mole of H+, for a base, one mole of OH-.
(english) The addition of boron in the range 0.0005-0.005% to certain steels increases the hardenability. A range of boron steels is now listed in the current BS 970 and are widely used for the production of cold headed fastenings.
(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.
(Software Engineering) focuses on the analysis and design of all elements of a complete product, service, or technology for the transformation of information or control
(Concrete Engineering) The shortening of a member in pre-stressed concrete which occurs on the application of forces induced by prestressing.
(Concrete Engineering) The colloidal gel (glue like) material that makes up the major portion of the porous mass of which hydrated cement paste is composed.
(Environmental Engineering) The removal of any dissolved or suspended contaminants beyond secondary treatment, often this is the removal of the nutrients nitrogen and/or phosphorus.
(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.