ผลการค้นหา

ค้นเจอ 464 รายการ

Blow Down

(english) Process that rids boiler feed water of solids and maintains the proper chemical balance of the feed water. Blow down can also be used to rid drum(s) of excess water.

Patterns

(Software Engineering) a stylized description or characterization of a software problem or capability and/or the manner in which a solution to the problem or capability may be characterized, applied, and implemented

Black Plate

(english) A light weight or a thin uncoated steel sheet or strip so called because of its dark oxide coloring prior to pickling. It is manufactured by two different processes. (1) Form sheet bar on single stand sheet mills or sheet mills in tandem. This method is now almost obsolete. (2) On modern, high speed continuous tandem cold reduction mills from coiled hot rolled pickled wide strip into ribbon wound coils to finished gage. Sizes range from 12 to 32 in width, and in thicknesses from 55 lbs. to 275 lbs. base box weight. It is used either as is for stampings, or may be enameled or painted or tin or terne coated.

Global warming

(Environmental Engineering) The long-term warming of the plant due to increases in greenhouse gases which trap reflected light preventing it from exiting to space.

BACKUP BOTTLE

(english) A vessel, normally cylindrical, which is used to store gas for future release of the energy in the compressed gas to an accumulator.

Bending moment:

(english) A system of internal forces whose resultant is a moment. This term is most commonly used to refer to internal forces in beams.

Bedding a Core

(english) Resting an irregularly shaped core on a bed of sand for drying.

Detail design

(Software Engineering) a design activity that focuses on the creation of an algorithm

Right of Access to the Site

สิทธิในการเข้าพื้นที่ก่อสร้าง

Rigid:

(english) An idealized concept meaning something which does not deform under loading. In fact, all objects deform under loading, but in modelling it can be useful to idealize very stiff objects as rigid.

Moist Room

(Concrete Engineering) A room used for storing and curing cementitious test specimens. The atmosphere of this room is maintained at a temperature of 73.4 3.0'F or 23.0*1.7'0 and relative humidity of at least 98 percent. These facilities must be adequate to continually maintain free moisture on the exteriors of test specimens.

Make-buy decision

(Software Engineering) determining whether software should be built internally, acquired, contracted or built from reusable components

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด