ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 693 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "all to the good"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Nitrogenous oxygen demand (NOD)

(Environmental Engineering) The amount of oxygen required to oxidize any ammonia present in a water.

Brittleness

(english) The tendency of a metal or material to fracture without undergoing appreciable plastic deformation.

Requirements analysis

(Software Engineering) a modeling activity whose objective is to understand what the customer really wants

Burr Mashers

(english) Devices used to remove build up on edge of strip after the slitting process.

Butt end

(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.

Breaker

(english) Uncoiler rolls through which the strip passes; composed of a mandrel and leveling rolls which unwind the strip prior to processing through the Pickler. Breaker rolls assist in breaking up the Hot Mill surface scale.

Centroid:

(english) Similar to the concept of center of gravity, except that it applies to a two dimensional shape rather than an object. For a given shape, the centroid location corresponds to the center of gravity for a thin flat plate of that shape, made from a homogeneous material.

Adapters

(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.

give the right to access/possession of site

ให้สิทธิในการเข้าครอบครองพื้นที่ก่อสร้าง

Web engineering

(Software Engineering) the application of software engineering principles, concepts, and methods (or adaptations of them) to the development of Web-based applications or systems.

Maximum Size Aggregate

(Concrete Engineering) Aggregate whose largest particle size is present in sufficient quantity to affect the physical properties of concrete; generally designated by the sieve size on which the maximum amount permitted to be retained is 5 or 10 percent by weight.

Brinell Hardness Test

(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด