ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 823 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "on a / the tank"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Sacking

(Concrete Engineering) Removing or alleviating defects on a concrete surface by applying a mixture of sand and cement to the moistened surface and rubbing with a coarse material such as burlap.

Statistical quality assurance

(Software Engineering) techniques for process improvement that are based on measurements of the product and the process

Burr

(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Truck Mixer

(Concrete Engineering) A concrete mixer capable of mixing concrete in transit when mounted on a truck chassis.

Blow Back

(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

Landfilling

(Environmental Engineering) The placement of wastes into the land under controlled conditions to minimize their migration or effect on the surrounding environment.

Blister

(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.

Bending

(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.

Go, no-go decision

(Software Engineering) a point at which manager or the customer decides whether the project should proceed

Component reuse

(Software Engineering) the ability to reuse a portion of a model, source code, test case, etc.

White box testing

a test case design technique that makes use of a knowledge of the internal program logic

Bandsaw

(english) A power saw, the blade of which is a continuous,narrow,steel band having teeth on one edge and passing over two large pulley wheels.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด