ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.
(Software Engineering) a discipline that encompasses the process associated with software development, the methods used to analyze, design and test computer software, the management techniques associated with the control and monitoring of software projects and the tools used to support process, methods, and techniques.
(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.
(Environmental Engineering) The controlled aerobic degradation of organic wastes into a material which can be used for landscaping, landfill cover, or soil conditioning.
(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.
(english) Gears fitted to a machine to increase the number of spindle speeds obtainable with a cone or step pulley belt drive.
(english) To polish A smooth finish of high luster with a cloth or fabric wheel to which a compund has been added
(Environmental Engineering) The fluid entering a system, process, tank, etc. An effluent from one process can be an influent to another process. See effluent.
(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.
(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.
(Environmental Engineering) Any pollution from a source which cannot be attributed to a particular discharge point, e.g. from agricultural crops, city streets, construction sites, etc.
(english) A long, tapered cutting tool with serrations which,when forced through a hole or across a surface, cuts a desired shape or size.