ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 89 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "*process*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Change control

(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner

Secondary treatment

(Environmental Engineering) In wastewater treatment, the conversion of the suspended, colloidal and dissolved organics remaining after primary treatment into a microbial mass with is then removed in a second sedimentation process. Secondary treatment included both the biological process and the associated sedimentation process.

Blast Furnace

(english) 1) A furnace in which solid fuel (limestone, coke, iron ore) is combined with high-pressure, hot air blast (120,000 psi) to smelt ore in a continuous process (They are never stopped. They can be slowed down or idled). A Blast Furnace in the iron and steel industry is used to produce liquid iron.

Processing

กระบวนการล้างภาพ [วิชาถ่ายภาพ]; กระบวนการ, กรรมวิธี, การประมวลผล [ไฟฟ้าสื่อสาร]

Ottawa Sand

(Concrete Engineering) A sand used as a standard in testing hydraulic cements by means of mortar test specimens. Sand is produced by processing silica rock particles obtained by hydraulic mining of the orthoquartzite situated in open-pit deposits near Ottawa, Illinois; naturally rounded grains of nearly pure quartz.

Classic life cycle

(Software Engineering) a linear, sequential approach to process modeling

Bright Annealing

(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.

Box Annealing

(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.

Blast Furnace Gas

(english) By-product gas created by the iron making process which is used as fuel for the boilers.

Statistical quality assurance

(Software Engineering) techniques for process improvement that are based on measurements of the product and the process

Documents

(Software Engineering) deliverables produced as part of the software engineering process เอกสาร

Blasting (Blast Cleaning)

(english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด