ผลการค้นหา

BETA RATIO (#)

แปลว่า(english) The amount, expressed as a ratio, of particles in a fluid stream upstream of a filter, after the fluid posses through a filter, divided by the amount of particles downstream, for a particular size particle.

Breakout

แปลว่า(english) An accident caused by the failure of the walls of the hearth of the furnace resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.

Portland Blast- slag Cement Furnace (ASTM C 595)

แปลว่า(Concrete Engineering) The product obtained by intimately intergrinding or an intimate and uniform blending a mixture of granulated blast furnace slag and portland-cement clinker

Statically determinate:

แปลว่า(english) A statically determinate structure is one where there is only one distribution of internal forces and reactions which satisfies equilibrium. In a statically determinate structure, internal forces and reactions can be determined by considering nothing more than equations of equilibrium.

Build Up Coil

แปลว่า(english) A coil made by putting together two or more coils to make one max coil or one shippable coil.

System

แปลว่า(Environmental Engineering) An arbitrarily defined area or volume surrounded by a boundary and possessing specific inputs, outputs, and reactions.

testing by analyser

แปลว่าการตรวจสอบโดยวิธีคาดคะเน

Corrective maintenance

แปลว่า(Software Engineering) finding and fixing defects that have been reported by users

Formal technical reviews

แปลว่า(Software Engineering) a structured meeting conducted by software engineering with the intent of uncovering errors in some deliverable or work product

Butt Welding

แปลว่า(english) Joining two edges or ends by placing one against the other and welding them.

Maximum Size Aggregate

แปลว่า(Concrete Engineering) Aggregate whose largest particle size is present in sufficient quantity to affect the physical properties of concrete; generally designated by the sieve size on which the maximum amount permitted to be retained is 5 or 10 percent by weight.

Bent Axis Pumps

แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.