ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) A closed vessel in which water, is transformed into steam at a given pressure and temperature under controlled conditions.
(english) ZrO2 an acid refractory up to 2500 B0C (4532 B0F) having good thermal shock resistance and low electrical resistively.
(Software Engineering) a set of software engineering actions that helps ensure that changes are properly identified, controlled, and reportedChange report
(Environmental Engineering) In wastewater treatment, the conversion of the suspended, colloidal and dissolved organics remaining after primary treatment into a microbial mass with is then removed in a second sedimentation process. Secondary treatment included both the biological process and the associated sedimentation process.
(english) A cutting tool in which the tool bit,the boring bar and in some cases the tool holder are incorporated.
(Environmental Engineering) Treatment of a waste in place, as opposed to pumping or digging the waste up and then treating it.
(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner
(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.
(english) One of the lubricating oils generally applied on tin Mill Products (tin plate, TFS-chrome/chrome oxide coated steel, and blackplate).
(Software Engineering) a design method that limited design constructs to only three basic forms and constrains program flow for better quality
(Concrete Engineering) Another term for condensation. The term is especially applied to base and soil substrates under highway pavements. where the barometric pump causes the inhalation of humid air, which then condenses in those structures, causing an ever increasing moisture content and sometimes instability.
(english) A hardened tempered bright polished high carbon cold rolled spring steel strip produced especially for use in the manufacture of band saws for sawing wood, non ferrous metals, and plastics. Usually carries some nickel and with a Rockwell value of approximately C40/45.